Question 1

How to Transport Refrigerator?

Accepted Answer

Back your dolly up to your pickups tailgate or truck ramps (if available). Have your assistants position themselves below the fridge on each side. While you either lead up the truck ramp or stand in the truck bed and lift from the dolly handle.  Coordinate your efforts to lift simultaneously. Pull straight up with the handles of the dolly while your helpers on the ground lift from the base and push it back into the bed.nnWith your fridge positioned fully against the cab wall of the bed the next step is securing it to your trucks anchor points with a reliable set of ratchet straps. Make sure you know your straps working load limit and examine them for any wear and tear or other damage that may limit their ability to function properly. With tall heavy objects like a refrigerator, you will want to tie-down from at least two sides. Run your first strap over the top of the fridge and the second around the front, to pull the fridge towards the cab. Tighten your ratchets down. Give it a shake test to ensure there is no movement.

Question 2

How to transport a dog?

Accepted Answer

If riding in the cab isn’t an option for your dog it is possible to safely secure them in the bed. Either by securing in a travel crate tied down and properly secured to an anchor point like one of our trusty Bull Ring products. Or by using a product like the Bushwacker vehicle restraint system. This includes a strap that goes across the width of the pickup’s bed. A special harness is then used to tether the animal to this cross-strap. Never leave a dog to ride loose or untethered in your truck bed. A frightened or excited animal can easily jump from a moving vehicle. Or even be thrown out by the forces exerted by driving at high speeds.

Question 3

How to stop rust on a truck?

Accepted Answer

Often rusting begins under fender wells, where the metal is thin and weak. When balancing or rotating tires, thoroughly examine your fender wells for discoloration or deteriorated metal. Examine for signs of rust where body components meet, namely where parts are likely to experience friction over frequent use (door frame, where the hood meets fenders, around the trunk).nnOther key areas of your vehicle to keep an eye on include:nnThe spare tire well in the trunknDriver side floornFront and rear corners of the rocker panelsnThe lower sections of all corner panelsnnSpot rust repair is very similar to general paint repair. Begin by working away as much rust as possible with a wire brush. Next, knock down any remaining roughness with an abrasive grinding wheel. Cut through any paint and corrosion until bright, fresh metal is visible. Use a final round of sandpaper to achieve as smooth a surface as possible. Next, apply a primary layer of rust arrestor to your newly primed surface. Rust arrestor chemically converts rust to inhibit continued corrosion and help form the tightest chemical bond to previously damaged surfaces. Next, apply a thorough coat of primer on your newly prepared exposed metal surfaces. Follow this with a layer of paint, and lastly a clear coat to seal and protect everything.  Finally, buff the surface to evenly blend with your vehicle’s original finish.

BullRing offers FREE Shipping on all orders over $70 within the Cont. US

Tie-Down Anchors / RAM

’09 – ’22 Dodge RAM (Rail Cap Cut and Trim Required)

Raised Fit Tie Down Anchor Kits

Flush Fit Chrome Anchor Kits

Flush Fit Gunmetal Anchor Kits

Raised Fit Tie Down Anchors

Flush Fit Gunmetal Tie-Down Anchors

Flush Fit Chrome Tie-Down Anchors

Raised Fit Tie Down Anchors (Stainless Steel)